Clothes free life DIY outdoor privacy screen

When tech wiz AJ. Fox shared his idea and process for building a DIY privacy fence on Twitter I had to ask if he was willing to share.  He gracious agreed. So all you folks who need to create your own little clothes free nook away from prying eyes read on.

I created the fence for privacy while allowing some sun through,  I did not want to buy a standard fence panel as it would have been

Too high or too awkward to fit in, so i though pallets are good, slatted allowing sun through and just right height

image

mythemeshop sml

The pallets are bolted to the wall, with 2 inch screws at 10mm rawl plug. 4 seemed enough. Pilot holes drilled into timber. Then these holes

Marked on to wall and then drill holes with 10mm masonry bit. I secured another half of a pallet at the end to create required length

image

 

Capped the top off with timber to finish off. A fence gravel board was ideal width. I may yet stain it. 🙂

follow AJ

See pictures of the finished project  and more details http://foxprojects.uk/naturism/fence.html

4 Comments

  1. naturistsholiday April 20, 2015
  2. martbel April 18, 2015
  3. The Naturist Page April 18, 2015
  4. sassycoupleok April 18, 2015

Leave a Reply

%d bloggers like this: